Brushless Controller for 24/48/72/96V BLDC Motor

High quality brushless dc motor controller for 24V/48V/72V/96V BLDC motor. It supports a power range from 400W~10kW. Brushless controller equiped with powerful and intelligent microprocessor, up to 40000 electric RPM, compatible with 60 degrees or 120 degrees Hall position sensor and support any poles of brushless motor.

Specifications

Weight

• For 400W to 750W motor: 2kg
• For 1kW to 3kW motor: 2.5-4kg
• For 4kW to 6kW motor: 5-7kg
• For 7kW to 9kW motor: 8-10kg
• For 10kW to 12W motor: 11-13kg
• For 13kW to 15kW motor: 14-17kg

Features

• Brushless motor controller is designed for electric vehicles like electric motorcycles and scooters.
• It supports 24V, 48V, 72V and 96V high torque BLDC motors.
• The controller has a powerful and intelligent microprocessor, high-speed low-loss synchronous rectification PWM modulation, and strict current limit and torque control.
• 24V~96V BLDC motor controller has a battery protection function: When the battery voltage is low, the alarm will be timely and the current attenuation and low output to stop the protection of the battery.
• It also has over-temperature protection: When the temperature is too high or too low will automatically current attenuate to protect the controller and battery.

Basic Functions

1. 24/48/72/96V brushless motor has fault detection and protection. It can identify faults via LED twinkling code.
2. Battery voltage real-time monitoring. It will stop working when the battery voltage is too high or too low.
3. Built-in current detection and over-current protection.
4. It supports a 5V sensor power supply.
5. Boost switch can be configured. The brushless dc motor controller will output the maximum current when the switch is turned on.
6. The 24~96V BLDC motor controller is equipped with temperature measurement and protection functions. At low and high temperatures, the current is cut to protect the controller and the battery.
7. The economy switch can be configured. Limiting the maximum drive current to the controller is half the normal case when the switch is turned on.
8. 12V brake signal input can be configured.
9. Three phase Hall position sensor input, open collector output and the controller provide pull-up resistor.
10. The brushless motor controller has 3 switch inputs. Connect to GND for a valid signal. The default is the pedal safety switch input (to be configured via the customer software), the brake switch input and the reversing switch input.

Controller with CAN bus function (Optional)

The brushless dc motor controller supports CAN function, which provides communication based on CAN 2.0B extended frame and SAE J1939 protocol standard for vehicles. It can be used in vehicles, ships, AGVs and other equipment to exchange data with ECU and get speed and RPM feedback via CAN bus.

Dimensions (Unit: mm)

Tips: Is the 0-5V speed circuit isolated for the BLDC motor controller? 

Yes, you can use the battery voltage to provide 0-5V without using the brushless dc motor controller's +5V, connect the 0V of the battery power to the COM on the motor controller, and connect the positive terminal of the battery to the SV of the controller.